Saturday 4 June 2011

How do I change my head light?

Last night my head light went out in my car. Today i bought the bulb but i cant seem to figure out how to change it and im too cheep to pay someone. I have a 2002 ML320 Mercedes Benz. Anyone Know how to change it?|||1. open the hood





2. unscrew the whole head lamp and take it out of the front of the car





3. take out the old bulb





4. put in new bulb





5. put head lamp back in





6. put screws back in





7. close hood





then u are done|||Read the owner%26#039;s manual first if you haven%26#039;t already done so.|||What you do is you open your hood and right by the head light inside the hood is a door or there should be you open the door if there is a door which there should you unscrew the bulb and replace it then you put it back in and make sure the door and hood is closed if there is no door see if the auto place will change but it is fairly EASY.|||Photo Guide





Required items: a replacement, sealed-beam lamp and the appropriate screwdriver(s)?usually a Phillips-head (right), sometimes a Torx (left).





For easier access, remove the headlight trim piece if so equipped. This plastic trim ring is attached with a T-15 Torx screw at each corner.





Unscrew the headlight bezel. This lamp is secured with four Phillips-head screws (two on top and two below).





With the bezel removed, the lamp can easily be removed and unplugged from its wiring connector.





Plug in the new lamp and reverse the disassembly steps. Always check headlight aim when replacing a lamp.

No comments:

Post a Comment